References - cranes
Lifts at Kevitsa Mine
Year: 2011.
Location: Sodankylä, Finland.
Lifting a smokestack
Year: 2011.
Location: Mustasaari, Finland.
Equipment : Liebherr 1095.
Lifting a rotor onto a ship
Year: 2011.
Location: Olkiluoto, Finland.
Equipment : Demag CC 2800 and Terex CC 2500-1.
More info: Rotor weight: 386 tonnes.
Lifting boiler sections
Year: 2011.
Location: Riihimäki, Finland.
Equipment: Main equipment: Demag CC 2800-1. Auxiliary equipment: Liebherr LTM 1200-1 and Demag AC 100 as well as Hiab XS85 for equipping.
More info: The sections were lifted from horizontal to vertical position and turned towards the construction site inside the building. Total load lifted: 120 tonnes, length: 27 meters and lifting height: 70 meters.
Lifting an old soda recovery boiler
Year: 2011.
Location: Obbola, Sweden.
A wind power plant project in Norway
Year: 2011.
Location: Havøysund, Norway.
Changing an evaporation unit
Year: 2011.
Location: Husum, Sweden.
Launching a 60-foot Swan sailboat
Year: 2011.
Location: Pietarsaari, Finland.
Lifting a boxcar
Year: 2011.
Location: Salla, Finland.
More info: http://www.salla.fi/Museo
Moving Rajakievari (border inn)
Year: 2011.
Location: Salla, Finland.
More info: http://www.salla.fi/Museo
General lift of a drilling machine
Year: 2011.
Location: Göteborg, Sweden.
More info: The TBM drilling machine weighed 60 tons.
Dismantling project of a television mast
Year: 2011.
Location: Jepua, Finland.
Transporting a galleon from the workshop to the harbour and launch
Year: 2011.
Location: Kalajoki, Finland.
Changing a reactor at the Sköldvik refinery
Year: 2011.
Location: Porvoo, Finland.
Crane operations and special transports of turbine and generator
Years: 2010-2011.
Location: Alizay, France.
More info: Havator Transport Oy together with its partners supplied crane operations and special transports of turbine and generator from F-Alizay to Finland at October 2010. At February 2011 Havator carried out further transportations to S-Husum where items were lifted by means 350tn mobile crane, skidded in and further positioned onto foundations with Hydrospex SL125. Skidding and support equipment used at this technically demanding site weighed altogether approx 100 tonnes. Packed ices at Gulf of Bothnia stopped ferry traffic and forced to proceed by northern route via Tornio/Haparanda. Due to driving height of 498cm transports faced some challenges en route but they were won by professional and precise work.
Lifting a 92 ton steam turbine with 500 ton crane
Year: 2011.
Location: Finspång, Sweden.
Equipment: MAN heavy truck with 12 axled Goldhofer and Liebherr 500 ton mobile crane.
More info: Havator Cranes working together with Havator Transport.
Lifting the display screen at Lahti Ski Stadium
Year: 2011.
Location: Lahti, Finland.
Liftings in Olkiluoto
Year: 2011.
Location: Olkiluoto, Finland.
Equipment: Demag AC 500-1.
Transformer liftings, transportations and jacking onto track
Year: 2010.
Location: Rauma, Finland.
More info: Havator lifted (Demag CC 2800) from a ship at Port of Rauma a 280-ton transformer, which was transported through the city to Kuivassuo's transformer station. Havator Transport's equipment consisted of three trucks and a 16-axled carriage. At the transformer station Havator installed the transformer onto rails.
Diesel generators liftings and installations
Year: 2010.
Location: Olkiluoto, Finland.
More info: Havator lifted and installed into place six diesel generators, which weighed 30-90 tons.
Lifting of roof structure with eight cranes
Year: 2010.
Location: Östergötland, Sweden.
More info: Weight of the roof structure 62 tonnes.
Lifting of train cars
Year: 2010.
Location: Kokkola, Finland.
Transportation and lifting of footbridge
Year: 2010.
Location: Ale, Sweden.
Installation work of Swedbank Arena
Year: 2010.
Location: Stockholm, Sweden.
Equipment: Liebherr LR 1300W and Grove RT 880E.
Lifts of pier elements
Year: 2010.
Location: Pori, Finland.
Equipment: Terex Demag CC/PC 6800.
More info: Lifts of 280-tonne pier elements to a 50-metre radius at the construction site to expand Pori’s Mäntyluoto Port.
Disassembly of pulp mill
Year: 2010.
Location: Kaskinen, Finland.
Launch of a 90-foot Swan boat
Year: 2010.
Location: Pietarsaari, Finland.
Turning of Stacker
Year: 2010.
Location: Talvivaara, Finland.
Equipment: Liebherr LTM 1250 and Terex Demag AC 350.
Joint lift of a turbine part
Year: 2010.
Location: Tärnäby, Sweden.
Equipment: Terex Demag AC 350 and Grove GMK 5170.
More info: The temperature was almost - 40 °C at the Abelvattnet worksite.
Lifts of offshore wind power plant
Year: 2010.
Location: Pori, Finland.
Equipment: Demag CC 2800 with superl
ift.
More info: Havator lifted the elements of the first Finnish offshore wind power plant at Pori's Tahkoluoto.
Transport and lift of galleass
Year: 2010.
Location: Luvia, Finland.
More info: In July 2010, Havator transported the much publicised galleass Ihana to the seashore of Luvia. Havator also planned the lift work.
Pazflor uppending test
Year: 2010.
Location: Pori, Finland.
Equipment: Terex-Demag AC 350.
Reactor replacement at an oil refinery
Year: 2010.
Location: Porvoo, Finland.
More info: Lattice-boom crawler cranes Terex-Demag CC2200 and Sennebogen SL5500 were used in replacement operation of the 155-ton reactor. Havator Transport handled the transportation of the old reactor as well as the worksite transportation of the new reactor.
Interaction when lifting a harbour crane
Year: 2010.
Location: Pori, Finland.
Equipment: Demag CC 2800 and Liebherr LR 1250.
More info: The weight of the ha
rbour crane, 250 tonnes.
A heavy lift in Pori
Year: 2010.
Location: Pori, Finland.
More info: Lift of a 700 tonnes "pipelay ramp" onboard a vessel.
Lift and transport of plasticsprayers
Year: 2010.
Location: Uddevalla, Sweden.
Equipment: Trailer 4 + 9 axles, two cranes LTM 1100.
More info: Lift and transport of two plasticsprayers for Uddelvalla specialtransport, weight 1 x 87 tonnes and 1 x 117 tonnes.
Lift of 700-ton coil
Year: 2009.
Location: Pori, Finland.
Equipment: Terex-Demag CC 6800 and Demag CC 2800.
Lift of electrostatic precipitator
Year: 2009.
Location: Imatra, Finland.
Equipment: Demag AC 500-1 and Demag AC 350.
More info: weight of electrostatic precipitator 85 tonnes.
Lift of mould, reinforce ment and steel
Year: 2009.
Location: Gothenburg, Sweden.
Equipment: 5 tonnes Maeda mini-crane and Terex AC 40-1.
Assembly of Storrun wind power plant
Year: 2009.
Location: Östersund, Sweden.
Assembly of wind power plant
Year: 2009.
Location: Vanaküla, Estonia.
Equipment: Demag DC 2800-1.
Lift of a 25 tonnes tank
Year: 2009.
Location: Piteå, Sweden.
Equipment: Demag AC 500.
Taking down of rotor for service
Year: 2009.
Location: Raahe, Finland.
Equipment: Terex-Demag CC 2800.
Lift of house for transport
Year: 2009.
Location: Kokkola, Finland.
Swan 90S –transport and launching of boat
itle="- - - swan90s_pietarsaari.jpg" width="255" height="340" ismap="65535" style="border: 0px initial initial;" />
Year: 2009.
Location: Pietarsaari, Finland.
Pulling down of tower crane
Year: 2009.
Location: Olkiluoto, Finland.
Lift and transport of blocks to overhead crane
Year: 2009.
Location: Olkiluoto, Finland.
Equipment: Terex-Demag CC 6800 + SPMT.
More info: the blocks weighing 170 tonnes each were lifted from vessel.
Lifting of ship block
Year: 2009.
Location: Rauma, Finland.
More info: The ship block weighed 400 tonnes.
Lift of cyclones on top of a grain store
Year: 2009.
Location: Siuntio, Finland.
Equipment: Demag AC 350.
More infot: The group of cyclones weighed 23 tonnes and was lifted on top of the 41 metre grain store.
Expansion of harbour site
Year: 2009.
Location: Kotka, Finland.
Lifting of belt conveyors
Year: 2009.
Location: Aitik, Sweden.
Lift of nacelle in Loviisa harbour
Year: July, 2009.
Location: Loviisa, Finland.
Equipment: Demag AC 500-1.
More info:Year: the nacelle weighed 130 tonnes.
Terex Demag CC 6800 at Olkiluoto
Year: 2009.
Location: Olkiluoto, Finland.
Equipment: Terex Demag CC 6800.
More info: 4 - 7 May at Olkiluoto. Lifting from a pontoon to the assembly site - a 200-tonne cap, diameter 47 metres
Lift of belt conveyors at Riskulla heating plant
Year: 2009.
Location: Mölndal,Sweden
Lift of fibreglass container
Year: 2009.
Location: Kokkola, Finland.
Equipment: Demag AC 350.
Lift of boiler, Kemijärvi
Year: 2009.
Location: Kemijärvi, Finland.
Equipment: Demag AC 500-1 and Liebherr LTM 1250.
More info: the boiler weighed 82 tonnes.
Lift of a silo, Jyväskylä
Year: 2009.
Location: Jyväskylä, Finland.
Equipment: Demag AC 500-1.
More info: the silo weighed 57 tonnes.
Turbine and generator lifts
Year: 2009.
Location: Espoo, Finland.
Equipment: Demag AC 500-1.
More info: the turbine weighed 115 tonnes and the generator 120 tonnes.
Lift of locomotive
Year: 2009.
Location: Seinäjoki, Finland.
Joint lift of a footbridge at Lauko jetty
Year: 2009.
Location: Pietarsaari, Fin
land.
Equipment: Grove GMK 5180 and Demag AC 100.
More info: the bridge weighed 20 tonnes and the lifting height was 30 metres.
Lift and transport of evaporation plant
Year: 2009.
Location: Umeå, Sweden.
Building site, Stockholm
Location: Kungsängen, Sweden.
Year: 2009.
Equipment: Liebherr 1140.
Lift of new evaporation plant
Location: Värö, Sweden.
Year: 2009.
Equipment: Terex Demag CC/PC 6800.
More info: the biggest component lifted weighed 185 tonnes.
Deep compaction at Haugesund
Location: Haugesund, Norway.
Year: 2009.
More info: weights of between 22 and 42 tonnes were used for the deep compaction.
Unloading operations at Holmsund Harbour
Location: Umeå, Sweden.
Year: 2009.
Lift of gas cleaner at Raahe
Location: Raahe, Finland.
Year: 2009.
Equipment: Demag CC 2800 and Demag AC 350.
More info: the gas cleaner lifted weighed 100 tonnes.
Heating plant repair work
Location: Hämeenlinna, Finland.
Year: 2009.
Equipment: Demag AC 500-1.
Lift of aircraft on to stand
Location: Luleå, Sweden.
Year: 2009.
Equipment: Demag AC 110.
Lift of rescue service launch
Location: Vaasa, Finland.
Year: 2009.
Equipment: Demag AC 80 and Demag AC 100.
Pioneering approach to replacement of railway bridge
Location: Nyköping, Sweden.
Year: 2008.
Equipment: Terex Demag CC/PC 6800 + SPMT.
More info: In Nyköping a railway bridge that was alomost 100 years old and weighed 200 tonnes was replaced with a new bridge. The new bridge weighed 320 tonnes. The lift was carried out completely from land.
Railway bridge replaced by new bridge
Location: Sunne, Sweden.
Year: 2008.
Equipment: Terex Demag CC/PC 6800.
More info: A railway bridge across an 80-metre wide stretch of water in Sunne was removed and replaced with a new bridge. A 200-tonner was used as an auxiliary crane.
Replacement of four bridges
Location: Gothenburg, Sweden
Year: 2008.
More info: In Gothenburg centre, a total of four bridges were replaced with new bridges. Havator Group contributed transport and lifting to the project. Some components weighed between 310 and 540 tonnes. Four cranes were used for the job as well as SPMT equipment. the heaviest lift - 540 tonnes - was the biggest ever carried out by mobile cranes in Gothenburg.
Renovation work at steel plant
Location: Luleå, Sweden.
Year: 2008.
Assembly work at steel plant
Location: Luleå, Sweden.
Year: 2008.
Equipment: Demag CC 1400.
Deep compaction, Umeå
Location: Sand and Bergsboda, Sweden.
Year: 2008.
Transport and erection of windpower plant
Location: Bondön, Piteå, Sweden.
Year: 2008.
Equipment: Terex Demag AC-500 and Liebherr LTM 1220.
Lifting and construction at Igelsta
Location: Igelsta, Södertälje, Sweden.
Year: 2008.
Equipment: Terex Demag CC 2200, Demag AC 500-2 and Liebherr LTM 1250.
GoldBox lifted into place
Location: Kittilä, FInland.
Yeari: 2008.
More info: Suurkuusikko Gold Mine has a GoldBox weighing 108 tonnes.
Lift of reactor part
Location: Talvivaara, Finland.
Year: 2008.
More info: the reactor component weighed around 50 tonnes.
Lift of roof onto pine oil tank
Location: Pietarsaari, Finland.
Year: 2008.
More info: weight of the roof: 27 tonnes, diameter 18.6 metres and height 20 metres.
Lift of Shipping Administration craft into water
Location: Gothenburg, Sweden.
Year: 2008.
200-foot yacht turned round
Location: Pietarsaari, Finland.
Year: 2008.
Equipment: Liebherr LTM 1070, Liebherr LTM 1080 and 2 x Demag AC 100.
Demolition of sugar factory
Location: Salo, Finland.
Year: 2008.
Equipment: Terex Demag CC 2800.
Assembly from land of sections for harbour jetty
Location: Pietarsaari, Finland.
Year: 2008.
Equipment: Terex Demag CC 2800.
Pelletising plant worksite, Kiruna mine
Location: Kiruna, Sweden.
Year: 2007.
Equipment: Demag AC-80 and Grove GMK 5180.
Lift of boiler part
Location: Umeå, sweden.
Year: 2008.
Equipment: Terex Demag CC 1400.
Replacement of electrostatic filter
Location: Kokkola, Finland.
Year: 2008.
More info: the old filter weighed 155 tonnes and the new one 222 tonnes.
Lift of fuel silo
Location: Örnsköldsvik, Sweden.
Year: 2008.
Construction work on football arena
Location: Gothenburg, Sweden.
Year: 2008.
Erection of concrete pillars at hall building site
Location: Pietarsaari, Finland.
Year: 2008.
Equipment: Demag AC 100.
Construction site, Volvo plant
="65535" />
Location: Umeå, Sweden.
Year: 2008.
Launch of 100-foot yacht
Location: Pietarsaari, Finland.
Year: 2008.
Steel erection in Umeå
Location: Umeå, Sweden.
Year: 2007-2008.
Country:
City:
Title: